First grading | |||||||||
2006.2.23(Thu) | |||||||||
I started course production today. At the beginning, I measured
form and dimensions of a course. And I was able to adapt myself to the
dimensions that I cut materials (a pipe made in Japan) which were necessary for
production and measured. I polished the pipe which I cut as the finish
neatly. |
|||||||||
2006.2.27(Mon) | |||||||||
I worked on I painted the pipe which I cut the other day today.
Because Japan had only a black pipe, I worked on this to make it a white pipe.
The painting took 3 hours and was very hard. |
|||||||||
2006.2.28(Tue) | |||||||||
Because the painting was over, and a pipe was completed, I
decided to try to assemble it today. It cut a long place on the way and added
dimensions. |
|||||||||
2006.3.3(Fri) | |||||||||
I started production of the accessory lamp which lighted up the
course that I made the other day today. I used a white cosh this time from the
beginning. It was hard to cut a cosh. |
|||||||||
2006.3.14(Tue) | |||||||||
I let a machine recognize a goal today. However, I was not
successful very much. |
|||||||||
2006.3.15(Wed) | |||||||||
Two machines watched tentative completion and came to wait for a
program afterward. I do not yet do a test with shapelessness either, but it is
the first barrier passage if this moves. I want to try so hard that I am in time
though time is running out. |
|||||||||
2006.3.16(Thu) | |||||||||
The program is put and the start experiment will be done
tomorrow. |
|||||||||
2006.3.22(Wed) | |||||||||
I was able to do it in line trace of unit No.2. |
|||||||||
2006.3.23(Thu) | |||||||||
I performed operation check of a machine chiefly today. The unit No. 2
came until completion close at hand. |
|||||||||
2006.3.24(Fri) | |||||||||
I made two introduction pages today because two machines came until completion close at hand. In addition, I talked about a strategy. |
About unit No. 1 "MARUPIN" | ||||||||
About unit No. 2 "SEKAI TURBINE" | |||||||||
|